How Do I Fix a Clicking Noise on My Peloton Bike?

peloton pedal clicking

The Peloton bike gives you the utmost comfort while delivering the best performance. As exciting as your Peloton bike is, it can become quite a nuisance if it starts to make a clicking noise during or after the ride.

The clicking noise can be creepy and sometimes very annoying. So you wonder how do you fix a clicking noise on your Peloton bike?

Clicking noise in your Peloton bike can be disturbing, especially if you are engrossed in a workout. This is enough to demotivate you, behind which is a significant risk of negatively affecting your exercise routine.

A Peloton Bike is a fun machine designed for indoor use, this compact cycle stands out in the ocean of traditional bikes that are ridden outside. With its unique features, you can always enjoy an exciting workout or workout at your convenience.

However, one thing that could dampen your spirits is the clicking noise during the ride.

There are a number of things that can cause a clicking noise in your Peloton bike. If you want to know how to fix a clicking noise on your Peloton bike, we will look at some of the most common reasons and solutions.

Also Read: Best Pedals for Peloton Bike

What are the common reasons for clicking noise on Peloton Bike

Here are the complete details of possible reasons behind the clicking noise on Peloton Bike:

1. Wear and tear of parts

As you use your Peloton bike, the primary components get worn out or damaged. This is normal with any machine, just like how you need to change your car tires from time to time.

The wheel of a bicycle can get damaged for many reasons, such as the repeated impact on uneven surfaces, lack of lubrication, etc. If your wheel gets damaged, it can result in a clicking noise when you pedal.

2. Loose or Broken Parts

If any part of your Peloton bike is loose and shaky, it has the potential to cause a clicking noise. One common area where this can happen is on the flywheel axle due to repeated assemblies and disassemblies.

Loose or worn-out pedals can also cause a clicking sound because they do not fit appropriately on the flywheel.

3. Flywheel imbalance

The flywheel is the most critical part of a Peloton bike because it has to withstand extreme pressure and weight, be accurate in its momentum generation, and have smooth rotation throughout your workout. When the balance of the machine is disturbed, you will start noticing that some parts are moving more than others. The imbalance of the flywheel can cause a clicking noise during your workout.

4. Loose parts on other areas such as pedals and stabilizers

As mentioned above, loose parts such as pedals and stabilizers can also cause a clicking noise while you ride your Peloton bike. This is very common if you do not tighten these parts properly after every workout.

5. Other common issues with Peloton bikes

Broken Linkages: A loose linkage can also cause a clicking noise during your ride because it does not allow smooth pedaling. Broken linkages should be replaced as soon as possible to avoid further problems.

Worn-out parts: As you use your Peloton bike, some parts get worn out or damaged. If any part of your Peloton bike is loose and shaky, it has the potential to cause a clicking noise. In some cases, if your pedals are faulty, they can result in a clicking noise while you ride your peloton bike.

Check This: Best Fan For Peloton Bike

How Do I Fix a Clicking Noise on My Peloton Bike – Top Methods

Here we will discuss the possible solutions to fix the clicking noise in your peloton bike. No single solution applies to all Peloton bikes, as defects and damage can occur at different stations.

Method 1: Tighten loose parts

If your peloton bike has a clicking noise, the first thing you should do is tighten all worn-out and loose nuts and bolts. The easiest way to do this is by using a wrench.

The wrenches that come with the machine are usually insufficient, so you might need to get a wrench from your local hardware store.
Remember that some nuts and bolts may be tight enough for you to feel them, but they do not fit perfectly. This is why it is important to apply pressure on all sides of the nut or bolt when securing it.

Method 2: Replace damaged parts

If the noise is coming from the flywheel area, you will have to replace it. Replacement parts are available on Peloton’s website if you do not want to wait for them to be shipped. As always, check your local hardware store before ordering replacement parts.

Method 3: Use lubrication

If the clicking noise is due to a loose part or a damaged axle, you can use lubrication to fix it. Apply a generous amount of oil on the worn-out areas using a lube spray.

This will not only tighten the parts but also prevent them from wearing out too quickly. Before applying anything, always check if there are any instructions on the lube spray.

Method 4: Replace damaged flywheel

If your peloton bike is making a clicking noise, it might also be a faulty flywheel. Before replacing the flywheel, check if you have tightened all nuts and bolts properly. If the clicking noise persists, you will have to replace it.

Flywheel replacement is not a job that anyone can do. You must let Peloton handle this because your machine might not be able to function without its flywheel.

Method 5: Use a Hammer

If you have a defective flywheel and want to replace it yourself, you can use a hammer to tap the edge of the flywheel.

This will loosen the edge enough for you to pull it off. Although this is not an optimal way of fixing such problems, it’s better than letting Peloton handle your bike when it’s still under warranty.

Method 6: Contact Peloton customer support

As always, if you have a defective part and can’t fix it yourself, contacting Peloton’s customer support is the best option. They will inspect your bike and find out what exactly is causing the clicking noise before sending a replacement part or a technician to repair it for you.

Check This: Best Toe Cages For Peloton Bike

How to Avoid Getting the Clicking Noise on Your Peloton Bike – 9 Tips

1. The first thing you should do is check all nuts and bolts that secure the flywheel. If any nut or bolt is loose, tighten it immediately. You never know when this might happen again so always be vigilant.

2. Make sure that your bike does not have loose parts. Make some tests to ensure that all nuts and bolts are tight enough, but do not tighten them too much as this might cause your bike to malfunction.

3. It is also important not to ride at high speeds without attaching the handlebar pad securely. It’s easy for the pad to fall off if you don’t connect it correctly.

4. Do not put too much pressure on the handlebar, as this might lead to loose parts. Always use recommended resistance settings for your workouts.

5. If you have already tried all of these solutions and checked if everything is tight enough, you can still try using a hammer to tighten up the blades of your flywheel. Do not forget to spray a generous amount of lubrication before going through this process.

6. Be sure to check the flywheel every once in a while for cracks and damages. If you find anything, immediately notify Peloton customer support or take your bike to a certified technician. This is very important because your flywheel will not function without the blades attached.

7. If all else fails, your last resort would be replacing components of your Peloton bike one by one until you find out which part is causing the clicking noise. If it’s a loose bolt or nut, tighten it and if it still causes problems, replace it with a new one.

8. If tightening all nuts and bolts does not work out for you, releasing a little bit of pressure from the flywheel is the next option. For this process, you will need a pair of pliers and a rubber mallet. Loosen the nut using the pliers first, then pick up your rubber mallet and hit on the flywheel to loosen it even more.

10. Last but not least, never attempt to repair your machine unless you have been instructed on how to do so by Peloton’s technicians. Even when you are not doing any repairs on your own, always check if everything is secure before working out.

Final Words

The first thing you should do is to check if anything on your Peloton bike is loose. If anything is not secured enough, tighten it up immediately. This includes nuts and bolts and handlebar pads or any other parts that might be responsible for the clicking noise coming from your machine.

If tightening everything fails, then try using a hammer to loosen the blades of your flywheel. Do not forget to lubricate your machine before going through this process.

If replacing parts does not work for you, simply let a certified technician do it for you.