How to Take Off Peloton Shoes – Step By Step Guide

How to Take Off Peloton Shoes

Are you looking to take off your Peloton shoes and ride on your Peloton bike? The new generation of cycling shoes is a game-changer. Peloton is one of the hottest brands in fitness, and they have created an excellent, stylish range of shoes to make you pedal even faster.

Having your Peloton shoes on for a prolonged period can sometimes be tiresome. You might find it necessary to take them off now and then and use the bike without wearing any shoes at all.

Although they appear to be very sturdy, it is important to know how to remove them so you don’t end up damaging the shoe or hurting yourself in the process.

There are several ways to remove the shoes, but they all involve a certain degree of force and patience. Here’s a quick guide on how to get your Peloton shoes off without damaging them or hurting yourself in the process.

How to Take Off Peloton Shoes – Step By Step Guide

Here is how to remove your Peloton shoes in a few simple steps. You should be able to get them off in less than five minutes, assuming you have the appropriate-sized shoelaces or straps that attach the peloton cycling shoes securely around your ankles.

1) Position yourself at a walking pace, so you don’t stumble and fall flat on your face while removing the shoes. Take one side of each shoe strap over one arm and either wind the laces through them and tie a knot on either side or secure the shoe straps with Velcro. Make sure that you have positioned your hands so as not to put any strain on your Achilles tendon while removing the shoes.

2) Position yourself at a walking pace again, so you don’t stumble and fall flat on your face while taking off one of the peloton compatible shoes at least each time.

3) Grip one shoe with the fingers of your left hand and the other one with your right. This will assist you in removing those shoes without slipping off or hurting yourself while doing so.

4) Start by lifting each side of the foot as high up as possible over the top just below where the heel would be if you were walking naturally instead of wearing Peloton cycling shoes (unless it’s too difficult, depending on what kind of pedals are attached). Pointing your toes down will make reaching the shoe easier and get your fingers under it.

The Peloton shoes should easily slide off over the top at this point without too much effort since that’s where they are in their resting position, flat on the ground instead of above-the-ankle as usual walking shoes would be.

5) If you find yourself struggling with removing either of these two pairs for some reason, sit or stand up straighter if possible, but don’t be afraid to use your hands. The shoes will almost always slide off easier once the arms are free, and you can place only one hand on any shoe or such as needed to keep from falling, awkward or not.

6) Finally, once you are sure the shoes have been removed or that both of your hands and arms can’t be used to remove them any longer, use a shoelace to tie their laces together, so they don’t get lost again.

Here I will discuss how to avoid having your shoes get stuck in all sorts of devices you have on or are attached. There are a couple of little tips it seems that everyone can agree upon.

1) Make sure the battery is attached.

2) Ensure all cables are securely tucked or rubber-banded to avoid loops, strangling hazards, and feet being crushed against other legs ​​​​ in a sudden crash. Usually, these cables can be run within 1-foot of the pedals if you have space on your desk but don’t crowd things by crossing over the top of each others’ spaces either (I keep mine straight lengthwise).

3) Make sure the Peloton box and each footrest is not pinched between your feet or the feet of any nearby studio equipment.

4) Do not sit cross-legged on top of the pedals. Have a stable surface where you can lower 3-10 lbs to prop up your pelvis while sitting without losing balance.

5) Do not block the sensors in shoes with small solid objects. If at all possible, keep this flat or rubber side up, so obstacles don’t obstruct them.

6) Make sure to run a stretch of your non-hurt leg over the top pedal and do likewise for other machines so you can slip out if anything becomes problematic. Many people use their stringy hair as it falls below the area where the device sits behind the shoe to avoid blocking the sensor from pressing against flesh.

Final Thoughts

The Peloton cycling shoes are sturdy enough, so you don’t have to worry about damaging them if you try to take them off. They are tough, and they will most likely be fine even if it takes a bit of effort to get them on or off.

You can choose to use the laces provided with the shoes, but we recommend using shoe straps since they make it easier to put them on and especially take them off without struggling and potentially hurting yourself in the process.

Be careful not to pinch any sensitive areas of your feet while taking them off or hurt yourself in the process if possible. It depends on your level of patience and how much experience you have removing shoes in general, but you should be able to get the job done regardless.

Related Posts: